Bluephase PowerCure 100-240V

Bluephase PowerCure light-curing lamp

Features of the Bluephase PowerCure lamp:

Thanks to its wide band, it is perfect for the polymerization of all light-curing dental materials.

Automatic assistance system for optimal curing.

The light is able to detect if the handpiece moves during exposure. A vibration indicates incorrect use and automatically extends the exposure time by 10% (if necessary.)

Cannot be activated in free space.

Reliable polymerisation performance for all light-curing materials thanks to LED polywave.

Polymerisation in a very short time (from as little as 3 seconds) thanks to the high intensity of up to 3000 mW/cm2.

10 mm wide light duct for time-saving single exposure polymerisation procedures.

Additional pre-polymerisation programme.

The 3sCure programme (3050 mW/cm 2 ) should be used for direct restorations in the posterior region.

The 3sCure program should not be used for very deep or sunken cavities.

Technical Specifications of the Bluephase PowerCure Lamp:

Wavelength range: 385-515 nm

Luminous intensity:

3sCure programme: 3050 mW/cm2 ±10 %

Turbo Programme: 2100 mW/cm2 ±10 %

High Power Programme: 1200 mW/cm2 ±10 %

PreCure Programme: 950 mW/cm2 ±10 %

Functionality: 3 min on / 7 min off (intermittent)

Light duct 10>9 mm, autoclavable

Signal transmitter: Acoustic every 10 seconds and every time the start/stop button or the time/programme selection button is activated or the glare protection is activated or the polymerisation process is cancelled and 30 seconds waiting time after having used the 3sCure programme twice in succession

The hand piece dimensions: Length = 170 mm, Width = 30 mm, Height = 30 mm

Weight of handpiece 135 g (incl. battery and light pipe)

Operating voltage of the handpiece:

3 7 V DC with battery

5 V DC with power supply

Operating voltage of the charging base: 5 V DC

Power supply:

Input: 100-240 V AC, 50-60 Hz max 1 A

Output: 5 V DC / 3 A

Temperature +10 °C to +35 °C

Relative humidity 30 % to 75 %

Ambient pressure 700 hPa to 1060 hPa

Dimensions of the charging base: Depth = 110 mm, Height = 55 mm

Weight of charging base with radiometer 145 g

Charging time Approx. 2 hours (empty battery)

Handpiece power supply Lithium-ion battery

Bluephase PowerCure lamp contents:

1 Charging cradle with power cable and power supply unit

1 Handpiece

1 Handpiece holder

1 Light guide 10>9 mm

1 Glare shield

3 Anti-glare cones

1 Set of sleeves (50 pieces)

Instructions for use.

https://www.ivoclar.com/el_gr